Terms & Conditions | Wrap Innovations | Car Vinyl Wrapping Specialist

Wrap Innovations LTD. Terms and Conditions and Disclaimers

General Terms and Conditions and Disclaimer

Payment is due as invoices sate when they are received unless credit terms have been extended with credit references supplied.

A 30% deposit is required for all services offered; this will book in your vehicle officially. The remaining 70% is required to be paid before your vehicle can be collected. No vehicle will be handed over to the owner until the full amount owing is paid. If the remaining 70% of payment is not paid within 14 days, you will be liable to pay a collection fee of 5% of the amount outstanding. If in an extreme case your due amount remains outstanding, we will pass your account on to a debt collection agency. You will be liable for any fees incurred as part of the debt collection process. We also reserve the right to halt any services we provide to you in the event of an unpaid account.

Pre-Inspection At the time of drop off, one of our installers will complete a pre-inspection of your vehicle including paperwork and photos, similar to renting a car. A copy will be provided at your request.

Wrap Innovations LTD does not warranty any work that a customer has agreed for us to arrange through a third party.

Wrap innovations LTD is not responsible for losses or damage to cars or articles left in car in case of fire, theft, or any causes beyond control.

Wrap Innovations LTD will not be liable for any damages which are incurred when the vehicle is left outside the shop.

Use of Images and References on Completed Work

Wrap Innovations LTD may, at its sole discretion, use images or video footage of completed work and/or refer to Client in Wrap Innovations LTD portfolio and any other marketing materials, including but not limited to press releases, brochures, flyers, signs, videos, and vendor marketing materials promoting Wrap Innovations LTD and its services.

Payment Terms

Nonrefundable deposit:

Wrap Innovations LTD. Requires a 30% nonrefundable deposit in order to lock in a time and day to start works. This deposit is nonrefundable if customer decides to cancel works before it’s started for any reason. Deposit can be used at a later day toward other works only if the cancellation is made one week prior to install date.

30% nonrefundable deposit with the order confirmation, prior to printing or installing, with the balance to be paid before vehicle drop off. Prior to collection or delivery or upon pickup of the vehicle the remaining 70% of final balance must be paid in full. Once the work is performed and before the client takes possession of their vehicle, the client must pay Wrap Innovations LTD the remaining balance due for the installation. Payment must be made 100% in full before vehicle handover.

In the event that the customer fails to make payment in full on the job invoice, the customer irrevocably authorizes Wrap Innovations LTD to remove the graphics supplied. Since these are custom jobs, once the job is printed, delivered and or installed, all contracts are final, and no monetary refunds can be issued.

Vehicles must be delivered to our location clean and free from grease and oil or any prior applied ceramic coatings. A cleaning charge of $100.00 or more may be applied if the vehicles are not in a satisfactory clean condition unless stated otherwise.

All graphics remain the property of Wrap Innovations LTD until paid for in full. Pending payment for goods supplied, the customer holds the goods as the property of Wrap Innovations LTD, and the goods must be kept identified as belonging to Wrap Innovations LTD. In the event that the customer fails to make payment, the customer irrevocably authorizes Wrap Innovations LTD to remove the graphics supplied.

Disputes

Clients shall identify to Wrap Innovations LTD in writing any dispute within 30 days of the date of the invoice. If disputes are not identified in writing, the Client has accepted the invoice. Clients must return to Wrap Innovations LTD any and all work in dispute, accompanied by written explanation. After investigation, errors on our behalf will either be corrected or credited to the Client’s account.

We will not accept responsibility for consequential damages or loss of any kind resulting from the sale, installation, or delivery of our wrap products. It is the client’s responsibility to read the fine print thoroughly prior to contracting Wrap Innovations LTD. to perform any vehicle wraps.

Returns/Disputes

If the client has a concern with the job, Client must contact Wrap Innovations LTD IN WRITING before proceeding with any charge backs or credit returns. Wrap Innovations LTD will offer 30 days opportunity to correct and resolve any disputes prior to any legal action. All Banners and Vehicle Wraps are custom made projects that are not refundable. If the client has a concern with the job, Client must contact Wrap Innovations LTD in writing before proceeding with any charge backs or credit returns or legal action. Wrap Innovations LTD will be given the opportunity review the complaint, respond, and to fix the complaint. After Wrap Innovations LTD is given the chance to explain the concerns, then the client has the right negotiate an agreement with Wrap Innovations LTD. If no agreement can be met, then mediation is the first option prior to any client claims. Since all jobs are custom products. Wrap Innovations LTD must be given the opportunity to reprint or reinstall any job before the client issues any credit card charge backs or returns. In the event that the client issues a credit card charge back or alleges he does not authorize the credit card transaction, the credit card company will issue an inquiry. When the credit company investigates the claim and if the credit card company’s decision is made in favor of Wrap Innovations LTD the client will be held liable for all legal fees and professional research and discovery time associated with Wrap Innovations LTD having to file an Inquiry / Retrieval request by the credit card company. If a credit card dispute is decided in favor of Wrap Innovations and LTD, Wrap Innovations LTD suffers any loss of credit card business associated with a client’s charge back request, the client will be liable for all legal fees and any credit card business Wrap Innovations LTD is not able to process during this period of the dispute resolution.

Job Cancellation and Errors

If the Client cancels the order before its completion, the Client shall be responsible for the cost of any proofs, artwork, materials, and work done until cancellation notice is received in writing. In addition, Wrap Innovations LTD reserves the right to charge a 15% cancellation charge in addition to the actual charges to cover unbilled internal costs including but not limited to scheduling, client communications and resources utilized. Wrap Innovations LTD will not be held responsible for errors in work after final client sign-off or neglect of final sign-off. No claims will be honored after 24 hours of receipt of any completed and delivered work. Any verbal order will be accepted, but in the absence of any supportive documentation, Wrap Innovations LTD will not be responsible for any verbal mistakes. Everything must be in writing. Wrap Innovations LTD will not accept responsibility for the inaccuracies in orders telephoned or faxed by the customer. Wrap Innovations LTD does not offer refunds.

Limitation of Liability and Confidentiality

Wrap Innovations LTD and the Client understand that during our business relationship, both parties may make known to the other, confidential information and business trade secrets. It is Wrap Innovations LTD policy to treat such information as confidential and we expect the Client to do the same.

Project Start Time, Substrates, and Installation

The start time of any project does not begin until ALL support files and items related to completion of the job are in house, the Client approves the artwork, and the Client is accepted for credit and billing terms. Wrap Innovations LTD will consult with the Client to determine the substrate and process that will best suit the needs and conditions set forth in the scope of the project. Ultimately, the Client accepts full responsibility for determining if said purchased item will perform to their requirements on the substrate(s) to which they are applied. Wrap Innovations LTD cannot control weather conditions, which may result in delays with installation. As such, additional labor and/or travel costs may be incurred which are to be paid by Client. We reserve the right to determine the point at which weather conditions become too adverse to continue work.

Trademarks and Copyrights

Reproduction in any form, of copyrighted materials without prior permission of the originator is illegal. It is the responsibility of the Client to obtain said permission. Wrap Innovations LTD is in no way responsible for obtaining permission and assumes that the Client has obtained permission before the work is submitted.

Design and Printing

The design, name or mark, or other material in final form that is approved by the Client and selected for use will be the exclusive property of the Client upon final payment of all amounts due. All other design, names, marks, and other materials developed in the course of the project shall remain the property of Wrap Innovations LTD, as is customary in our industry. The Client’s ownership of legal rights in the final form of the item it selects is exclusive to the extent provided by applicable national and international laws. Legal protection and appropriate registration of a design, name, mark or other material developed by Wrap Innovations LTD is the responsibility of the Client. Where artwork is supplied by the client, it is the responsibility of the client to ensure the artwork is in a “print ready” format. It is the responsibility of the client’s designer to check the dimensions and layout of the actual vehicle(s). When we receive original logos or art we will not modify the color or design, because it may cause unacceptable errors. Wrap Innovations LTD will not be held responsible for any design layouts provided by the client. All original art must come to Wrap Innovations LTD ready to print. There will be a design fee for any changes made to client supplied art or layout. Design fee is $90.00 per hour. Where Wrap Innovations LTD provides the artwork, it is essential the client fully check the final proof with the actual vehicle to check for any variations (eg; style of lights, positioning of number plates and other major (no. of doors) or minor variations.

Client Supplied Design While we will do our best to make customer supplied designs work, we are not responsible for layout location of said designs. We employ a staff of graphic designers who can work with a customers in house designer to ensure accuracy in layout and designs. Depending on the scope of work or time spent on customer supplied designs, additional fees may apply.

Proofing Before any printing, you will have to approve either a digital or hard proof. You are responsible for any spelling, grammatical errors, number errors, etc. Please check these items carefully. We will NOT print until we have your approval.

Measurement of the vehicle is always recommended. It is the responsibility of the client to provide or purchase quality high-resolution pictures for large format printing. Wrap Innovations LTD will not be held responsible for low-resolution images provided by the client for printing. The client will be responsible for all Wrap Innovations LTD consultation fees if the client decides to take the project else ware for printing and installation.

Additional File Set-up/Design Charges and Color Matching:

If the Client’s files exceed the determined file set-up rate included in price of project, charges will be based on a rate of $90/hour with a $60 minimum and billed in 30 minute increments after the minimum is met. The Client will be notified of this charge prior to work being started and we require Client authorization before proceeding. If Wrap Innovations LTD is creating original artwork, design will be billed at a rate of $90/hour. Color matching charges are $90. Due to the nature of both screen and digital printing, we cannot match PMS colors exactly and we give no guarantees to precise color matches.

Color Matching Not all Pantone or PMS colors can exactly be duplicated by digital printing. We will do our best to match any specific color requests. Should you require a printed proof prior to printing, please notify us & we will arrange for a proof to be provided.

Estimates and Taxes

The Client order is subject to applicable state and local taxes.

Vehicle Wraps: Additional Terms, Conditions and Warranty Disclaimer

Installations

Graphics and alignment as applied to vehicle may not be precisely matched to the digital images (“proofs”) produced for Client’s review. Graphics applied to vehicles are intended to be viewed from a distance of at least twenty feet and Wrap Innovations LTD produces each vehicle graphic with the detail and quality appropriate for viewing from such distance. Wrap Innovations LTD expressly disclaims all warranties regarding paint jobs on non-standard OEM cars and trucks. Wrap Innovations LTD expressly disclaims all warranties on buses, planes, trains, RVs, custom vehicles, and vehicles with OEM paint that is more than 6 years old. If we are asked to cover existing vinyl decals, we cannot be liable for any damage caused during the installation or removal process to these decals.

Although we try to make the wrap look like a paint job, it is NOT paint. There may be extreme curves and bumps such as rivets and deep channel curves and moldings on the vehicle that the vinyl will not be able to conform to. In some small areas you will see evidence of the original color of the vehicle below the wrap. These may be small areas such as around door handles and the edges of the lights on the vehicles.

Vehicle wraps are designed on a 2 dimensional template. Since we are printing and installing on a 3 dimensional surface, small variations from proof are normal. This is due to compound curves, indents, recesses, body lines, rivets, etc of the vehicle. B. Seams & Overlaps; Wraps are printed on 54” wide material. Since most vehicles are larger than 54”, seems and overlaps may be necessary. This is a normal part of the wrap process.

Commercial wraps

A commercial vehicle wrap is made by applying 137.16cm (unless specified otherwise) cm vertical panels of vinyl. There will be 2.54cm seams where the panels meet. On a complex design with many matching points, Wrap Innovations LTD cannot guarantee that the graphics will match 100% alignment due to extreme complex curves on the vehicle. A 5% margin is considered acceptable on large outdoor advertising projects. Proofs are created on a flat surface and viewed at a relatively tiny size on computer screens and 20.32cm printed paper. In cases of curves, handles, deep grooves, rubber moldings/trim, on-the-spot adjustments may be made by the installer to assure maximum readability or alignment. In many cases there are slight differences between the printed flat paper proof and the 3-dimensional curved vehicle wrap. Due to the fact that a two-dimensional print is being applied to a three-dimensional vehicle and due to the minor variances in the accuracy of the templates. A piece of vinyl has limits and can only stretch so much before it changes color. In some cases, a relief cut has to be made into the vinyl that will reveal a small amount of the original vehicles paint color under the vinyl. In some cases, a patch needs to be installed to conceal vehicles original color. It is the only option. Areas under door handles, mirrors, behind gas caps, and inside door frames will not be wrapped. If we wrap extreme curved surfaces such as mirrors and bumpers, they may reveal the original paint color at the tight edges of the wrap. It has more to do with material limitations and not install quality.

If we are installing at the client’s nominated location, suitable conditions must exist. Vehicles need to be indoors, in a clean, dust free temperature-controlled environment, with a power supply and good quality lighting. With a minimum of 1.524 meters working space around the entire vehicle. Wraps are self-adhesive vinyl that will only adhere well to catalyzed vehicle paint and glass. Poor surface paint or clear coats will not allow the vinyl adhesive to stick properly, and the adhesive may fail. Extreme curves and deep pockets may exceed the limits of how far the material can stretch. Again, this is not paint it is a special pressure sensitive vinyl material.

Wrap Innovations LTD cannot be held responsible for any damage void of vehicle warrantee or anything caused through the application of the vinyl products. Wrap Innovations LTD is not liable if during the installation of a wrap the clear coat of the car begins to peel off. Original painted vehicles will not have any problems with the clear coat peeling off.

It’s not a good idea to rush the install process many things can go wrong. Wrap Innovations LTD reserves the right to take an additional day.

The wrap material that is used for vehicle wraps, does not stick very well to plastic or rubber parts such as window trims, side plastic moldings and plastic door handles. It is advised that these areas NOT be wrapped with adhesive vinyl. Initially the vinyl will stick, but over a short period of time such as a few months, the vinyl will fall off these areas. In most cases of vinyl lifting, if it is a material’s problem the lifting will present itself in the first few weeks after the initial installation. In most cases it is advised that the vehicle wrap be fixed so that the vinyl does not continue to peel back and become contaminated.

It is not uncommon to see small areas of the wrap lifting soon after the installation is complete. Several factors can affect the vinyl’s adhesive’s ability to stick to the vehicle surface. Here are a few:

If the surface is not prepared properly before the wrap, then the adhesive can fail to stick overtime. Extreme temperatures can affect the vinyl adhesive. Very cold or very hot temperatures. Extreme humidity in the air during installation can affect the adhesive. Dust in the air during installation.

You do not want to rush the installers because this type of work is all done by hand, and it takes time to install the vinyl with perfect placement.

The vinyl that is applied to original vehicle paint is warranted against adhesive failure and image quality for up to 4 years using 3M or Avery vinyl. The perforated window material is warranted for up to 1 years.

Vehicle Wrap Removal

Vehicle wraps should be replaced every 3 to 4 years. Most vinyl manufactures such as 3M and Avery recommend this to allow for clean removals. The problem is most companies want to gain maximum exposure of their marketing over time with the wrap and leave the vinyl on the vehicle for too long and the vinyl begins to crack. This is not good. As soon as you see the vinyl beginning to crack this is the sign that that wrap should be removed in that area and rewrapped if needed.

Horizontal surfaces such as the roof and front hoods receive extreme sun and heat damage. In many cases the sun will bake the vinyl into the paint on these horizontal surfaces if the vinyl remains on the vehicle for more than 4 years. Most vehicle wrap vinyl materials are guaranteed to remove cleanly from vertical surfaces for up to 4 years when applied onto original car paint. If the vinyl looks cracked on the roof or on the front hood that means the sun and heat exposure has damaged the original vinyl and the heat has backed it into the vehicles painted surface. If this is the case, when you remove the vinyl in that area paint damage may occur. When the vinyl is cracked like this, it will peel off only in small pieces when you begin to remove it. When the vinyl has expired its term of clean removability, paint damage may be unavoidable and Wrap Innovations LTD will not be held liable for any paint damage that results from expired vinyl with prolonged exposure to the sun and heat. In many cases if you have striping on the vehicle prior to a new vehicle wrap the old vinyl has become weak over the years of sun exposure prior to the new wrap. The old striping adhesive can become weak and in some areas the striping will come up as the wrap is removed. Wrap Innovations LTD is not responsible if old stripes come off during the removal of a wrap. When we wrap over existing vinyl strips or letters, the new wrap is so thin on top that there will be evidence that there is old vinyl underneath the new vinyl.

All removals are quoted separately. Wrap removal can be very time consuming and we charge by the meter and by the hour for the labor. Wrap Innovations LTD cannot be held responsible for any paint damage or existing striping damage when we do a removal. Wrap Innovations LTD will not be held responsible in anyway if the client is not happy because the existing graphics were not able to be removed using conventional methods of removal.

Wrap Innovations LTD does not use any steel or metal knives during the removal process. We use plastics that will not damage the vehicles surface. Wrap Innovations LTD does NOT engage in unconventional methods of vinyl graphics removal because it may damage the surface of the client’s vehicle. Unconventional methods for extremely old/burnt wraps may require, cutting or scraping of the vehicle surface or the use of harsh chemicals that may damage the vehicles painted surface. In some extreme cases when the wrap has been on the vehicle for more than 4 year the wrap may no longer be removable so the vehicle may need to go to a body shop to be sanded and repainted. We cannot be responsible for damage to vehicle when the vinyl is removed and would not advise application of a wrap on a re-sprayed surface, or poor quality/rusted paintwork. Please note, our experience shows that removal of vinyl designed for vehicle wraps, from good quality, factory original paintwork, will not damage the paintwork. However, it is the duty and responsibility of the owner of the vehicles to ensure suitability of the existing surface before it is wrapped. In the event that Wrap Innovations LTD is asked to remove pre-installed vinyl, installed by a company other than Wrap Innovations LTD will make every effort to remove the existing vinyl, but will not be held responsible for any damage they may occur to the surface of the painted vehicle after removal. This is due to the fact that not all preinstalled vinyl are designed to be removed. In many cases preexisting vinyl are non-removable.

Additional Charges

A $100 fee will be added to the invoice for all vehicles that have not been properly washed (i.e., the vehicle must be clean, not waxed, and no ceramic coating). This fee includes the labor cost of washing your vehicle by our certified installers. To avoid this charge, please wash your vehicle before your installation specialist arrives.

Paint Protection Film: Additional Terms, Conditions and Warranty Disclaimer

About Paint Protection Film

Paint protection film is an 8mil film designed to protect your vehicle’s paint from most rock chips and light scratches. It is manufacture warranted for 10 years from yellowing, cracking, blistering. There is no warranty if film gets damaged in accident or from debris.

Drying Time

Your new paint protection film will take 3-4 weeks to fully cure depending on weather conditions. Do not wash your vehicle for 7 days. Never use high pressure near the seams of your PPF.

Condition of Vehicle for Paint Protection Film Installation

Factory paint is not perfect. Your new car more than likely has several blemishes, drips, runs, nibs that may visually affect the looks of the install once PPF is applied. The client waives and releases us from any damage claims where PPF has been applied to a non-OEM paint surface.

Paint

Paint may lift on repainted panels/OEM paint if improperly prepped and painted. By authorizing us to proceed with the install, the client herby acknowledges the risks and waives any claims against us and agrees that we will not be liable in an event that damage does occur during the installation process. Occasionally during the installation, a piece of film may need to be removed and redone. In an event that the paint is damaged in the process we are not liable.

Paint Chips

PPF is to prevent your vehicle from future rock chip damage. PPF installation over rock chips may look like contamination after the install due to the unevenness of the paint surface.

Installation

Pre-cut kits involve stopping short of edges around badges, and other parts. PPF is a sacrificial layer and not completely invisible.

Expose Edges and Seams

Debris build up over time on exposed edges/seams will be more visible on light-coloured vehicles. We recommend ceramic coating your vehicle to reduce debris build up. There is no warranty or reapplication of film due to debris build up.

Badge, & Decal Removal

Badge and decal removal may cause the paint to be damaged. By authorizing us to proceed with removal, the client hereby acknowledges the risks and waives any claims against us and agrees that we will not be liable in the event that damage does occur during the removal process.

Imperfections

Though we strive for perfection in our installations, due to the nature of the product and environment, some degree of dust contamination and or minor imperfections may be present in every PPF application, also pre-existing flaws, scratches, and rock chips on the paint are often much more noticeable after the PPF is installed. PPF may have minor imperfections like orange peel, small nibs, and bubbles. Used and older vehicles will have more imperfections due to age.

Matte Paint

Due to the nature of your vehicles Matte Paint Finish we are unable to Compound or Polish the vehicle to remove any imperfections prior to coating, this will result in those imperfections being covered by the Ceramic Coating(s) or PPF, essentially “locking them in”.

Due to the Matt Paint Finish not being able to be compounded or polished, Wrap Innovations LTD does not offer a warranty on coatings or PPF applied to Matte Paint as there is no way to safely remove the coatings without damaging the matte finish. Should any part of the vehicle ever need to be re-coated for any reason, it is to be understood that the part would need to be repainted or replaced with a new part prior to the recoating.

Ceramic Coatings: Additional Terms, Conditions and Warranty Disclaimer

This disclaimer is to serve notice that you the client understand that Ceramic Coatings are scratch resistant, they are not scratch proof. Any scratches, swirls, chips, or other types of physical damage caused by any type of abrasion can happen and are not covered by any warranty. We offer a few different brands of ceramic coatings, and each brand has its own manufacture warranty.

Drying & Curing times

The first 24 hours after your vehicle is coated is considered the drying time. We will hold onto your vehicle during this time as it is crucial that it does not see environmental contamination or rain during this time. Once dry your vehicle is safe to leave our shop and drive. It will continue to cure; full cure time is 14 days from application. During the 14-day curing time it is crucial that you do not wash your vehicle with any chemicals. In the event bird droppings gets on the vehicle you can safely remove them with a silica waterless wash, or water, and microfiber towel. In the event sap, tar, or other harsh products get on your vehicle we ask that you bring the vehicle to us, and we can remove these safely and treat any of the affected surfaces as needed.

Ceramic Coatings On Your Wheels

If any brake dust or other contaminants are on your wheels it is advised to clean it off as soon as possible to prevent stains from occurring. It is to be understood that the longer something sits on a vehicles wheel, even if coated, the wheel can become stained, and that stain or discoloration may not be able to be removed and that no warranty provided covers staining of your wheels or re-coating of your wheels.

Glass Coatings

Glass, although in a solid state, is still a porous surface. A Coating on your glass is intended for the functional purpose of keeping your windows easier to clean and improve visibility in bad weather. It is not applied with the intent of protecting from chips, cracks, or etchings of any kind. Glass coating maintenance: Cleaning can be done by the end user with any Ammonia free glass cleaner.

Matte Paint

Window Tints: Additional Terms, Conditions and Warranty Disclaimer

What you should know before getting your windows tinted.

Disclaimer: This list is not written to scare you away from getting your windows tinted but help to keep you informed.

Window Tint is designed to be looked at from 5’ away, not 6”, while window tint looks nice its main function is not for cosmetic purposes the majority of the time. Window film blocks 98-99% of UVA/UVB rays and can reduce heat up to 60%.

Imperfections are normal in the first 4 weeks including hazing, moisture, bubbles, etc. Do not touch the film if you see any of these imperfections because it can make it worse and will cause damage that isn’t included in your warranty.

A Dot Matrix comes on some vehicles from the factory. They are little iron dots that can push away the tint from the window. We do have different options available if this is a cosmetic concern for you.

On some makes/models the window seals are so tight that we cannot always get the film to “tuck” in on the very sides this is sometimes an issue with foreign vehicles and may result in additional charges for additional time.

On framed roll up windows you will have a slight gap at the top. The film cannot go all the way to the top as it may peal.

As we always try our hardest to keep dirt from contaminating the film we cannot stop all the little particles in the air.

All film includes a lifetime warranty that protects from fading, peeling, discoloring, bubbling, and any other type of defect of the film. The following is not covered under warranty; any type of damage that you inflict to the window or film, this includes but isn’t limited to: breakage, stickers, sharp object damage, seat belts, rings, animals, etc.

Window Tint Instructions

Drying period- Your tint will take about 2 to 3 weeks to fully dry and cure. Your tinted windows may appear hazy or lumpy, and it may seem to have water bubbles.

Please do not roll your windows down for 48 hours or try to push the water out until dry! The rear windshield will be the most noticeable, just let it dry and cure

Cleaning

Do not use anything that contains ammonia. Do not use any chemicals, scrapers, scrubber pads to clean window tint. We recommend anything that is SAFE FOR TINTED WINDOWS cleaning spray, soapy water and soft paper towels are the best option.

Imperfections

Due to the nature of the product, some degree of dust contamination and or minor imperfections are present in every window film application. Pre-existing flaws or scratches and metal deposits on the glass are often more noticeable after the windows are tinted. Although we strive for the best result possible, contaminants do end up on the film. This is unavoidable
and very common.

Electrical Issues After Install

Modern vehicles are equipped with a multitude of electrical components. While we take every precaution to avoid damage during the tinting process, there are inherent risks associated with the application of water onto the windows, which may expose these electrical systems to moisture and water runoff. It is particularly crucial to note that windshield installations carry a higher risk, as water runoff behind the dashboard can potentially damage the vehicle’s Electronic Control Unit (ECU) or other electrical components.

Wrap Innovations LTD cannot be held responsible for any damages that may occur to these electrical systems during or after the tinting process. We encourage you to discuss any concerns you may have and ask questions before proceeding with the installation, ensuring that you fully understand the associated risks. Our team will be happy to address any inquiries you may have and provide the necessary information to help you make an informed decision.

Please note that by proceeding with the installation, you acknowledge and accept the risks involved with the tinting process and release Wrap Innovations LTD from any liability regarding potential electrical system damages.

If you have any further questions or concerns, we are here to assist you and provide the necessary guidance.

Dot Matrix

Most cars have a black ceramic edge on the top of the window. Sometimes this edge is straight and flat, sometimes it will have a dotted edge. These areas are thick and prevent the window film from sticking to the area between the dots. The results in a blurry looking strip on the glass

Window Tint- Terms and Conditions

DO NOT LOWER YOUR TINTED WINDOWS FOR 2 DAYS

DO NOT CLEAN WINDOW FILM UNTIL 30 DAYS AFTER INSTALLATION.

Must be TINT-SAFE, AMMONIA-FREE glass cleaners or MILD DETERGENT and WATER using a soft microfiber cloth.

Complete DRY-OUT time, including trapped moisture, water bubbles and cloudy-look take as long as 30 to 60 days after installation to dissipate.

Customers accept all liability for tints darker than the legal limit of 35% on driver and passenger windows and on all sedans or mini SUVs.

Barely visible seams, borders and dust specks are considered QUALITY WORK.

Seams will be used wherever glass curve dictates.

Rubber strips will be removed wherever necessary when glass clearance is required.

Decals will be removed unless other instructions are given.

Wrap Innovations LTD is not responsible for any malfunctions of the rear defroster or wires.

Wrap Innovations LTD does not assume responsibility for scratches on windows.

Defects caused by tampering, removal of tint, unauthorized alterations or repairs initiated by customer are not covered under our warranty and is automatically voided.

Wrap Innovations LTD Warranty’s and Further Disclaimers

Wrap Innovations Installation Warranty

This one-year workmanship warranty covers our installation work only. This does not include damage done by you or another individual, wear and tear, or mistreatment of the wrap. This only Includes damage found that is from improper installation. This includes lifting, peeling, and bubbling due to installation errors.

Door handles as a high wear and tear area will only be warranty once unless an issue is found directly after installation.

This warranty does not apply to metal, plastic, matte, or satin surfaces, non-painted primed vehicles, or repainted vehicles as we cannot guarantee the quality of the paintwork underneath to match the quality of our installation on top of it.

Warranty on Labor and Materials

Wrap Innovations LTD offers a one-year warranty on the installation, one-year on the material applied to the windows and one year on the cast laminated adhesive vinyl, applied to vertical surface areas. No warrantee on horizontal direct sun exposure such as roofs and front hoods. Anything over 10 degrees vertical to horizontal is considered horizontal. The wrap warranty will depend upon the customer’s care of the vehicle and the outdoor/geographic conditions. If you ever see the vinyl cracking, replace the vinyl immediately. We recommend hand washing only. Avoid high pressure, power washing and be careful never to use an ice scraper on window graphics. Also avoid harsh chemicals of any kind as they can deteriorate the laminate on the vinyl adhesive. Sweeping or brushing off the windows with a soft broom and the use of a rear defroster will not damage your window wrap. There are specially designed products to clean and polish vinyl graphics if needed. Please wait at least 1 week before washing your vehicle once applied.

Warranty on Third Party Work

Wrap Innovations LTD may offer some services through a third party. Wrap Innovations LTD does not warranty any work that a customer has agreed for us to arrange through a third party. This work cannot be warranted by Wrap Innovations LTD as they did not perform the agreed to work and there for cannot guarantee a third party’s work.

Use of Images and References on Completed Work